NPACK

ප්ලාස්ටික් යුෂ බෝතල් කැප් එසවුම් පෝෂක කපර් උපකරණ

නිවස »  නිෂ්පාදන »  පිරවුම් යන්ත්රය »  ප්ලාස්ටික් යුෂ බෝතල් කැප් එසවුම් පෝෂක කපර් උපකරණ

ප්ලාස්ටික් යුෂ බෝතල් තොප්පි එසවීමේ පෝෂක උපකරණ

විස්තර


Notification prior to starting the bottles capping machine model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary type

1:Before the machine is plugged in, make sure the power switch is in the closed state, and then follow the instruction.

2:If the machine does not run in a long time, it should be wiped with a piece of dry cloth and must not be cleaned with any corrosive cleaning agent.

3:It is strictly prohibited to spurt any liquid into the electric box of the machine, so as to avoid corrosion to the internal electrical components and cause short circuit.

4:Check according to the equipment packing list models, specifications and quantity of the equipment and materials to make sure that they meet the requirements of design and product standards and accompanied by certificates of conformity.

5: Check the appearance of the equipment to make sure that it is free from any deformation, damage and corrosion, and all spindles that they should be flexibly rotating without any blockage.

6: This machine is working under single phase AC 110V, and the flat 3-legged power plug should be plugged into the power socket with a ground wire.

Technical Parameters of model NPACK-AC50 Automatic bottles capping machine with caps bulk elevator feeding system rotary plastic juice bottle caps lifting feeder capper equipment:

plastic juice bottle caps lifting feeder capper equipment1

Model NPACK-AC50
Capping speed:15-30 pieces/min
Rated voltage:110V/60Hz(US Standard)
Machine Power:0.8KW
Ampere:2.2A
Exterior dimension:2230*1460*1600 MM(L*W*H)
Air Pressure: 0.7 MPa
Weight: About 300 KG

Capping machine in details:

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

plastic juice bottle caps lifting feeder capper equipment2

I.Structures of the machine:

plastic juice bottle caps lifting feeder capper equipment5

Ⅱ. Optical fiber electric eye description

1.electric Eye to detect bottles:

plastic juice bottle caps lifting feeder capper equipment6

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming
bottles.
When the incoming bottle is detected, the "turntable" rotates.

2. Lid-delivery electric eye

plastic juice bottle caps lifting feeder capper equipment7

►When it is operated in automatic mode, the purpose of this electric eye is to detect incoming covers.

When the incoming lid is detected, the "taking-out mechanism" rises for taking material.

3. Lid-delivery electric eye

►When it is operated in automatic mode: The purpose of this electric eye is to detect incoming bottles.

When the incoming bottle is detected, the "lock cap mechanism" rotates the lock cap downwards.

Ⅲ.Switch button and wiring port.

1.Touch screen and emergency stop

plastic juice bottle caps lifting feeder capper equipment9

2.Feed motor and lid vibration plate controller

Vibration plate controller

Vibration plate controller: By adjusting the voltage, adjust the discharging speed.

3.Power switch and sockets

4.Motor controller

Frequency transformer: By adjusting the frequency transformer button, adjust the motor speed.

Ⅵ.Maintenance on model NPACK-AC50 Bottles capping machine

plastic juice bottle caps lifting feeder capper equipment14

1 the යන්ත්රය දිගටි කිරීම සහ යන්ත්රයේ ක්රියාකාරිත්වය ප්රශස්ත කිරීම සඳහා යන්ත්රය පරීක්ෂා කිරීම හා නඩත්තු කිරීම අවශ්ය වේ;

The working machine should be maintained every three month; The bearing and gear transmission part must be lubricated with the grease; The lubrication must be done periodically; The slide way oil (N68) should be added into the part like reciprocating mechanism motion or lifting two times every day; The automobile oil(N68) should be added into the rotary or swinging parts; Every half month add the grease into the cam slot; Every month one time for oil nozzle by adding the grease;

සංරචක හෝ අච්චුව වැනි කොටස් මත බන්ධනය සංයුක්ත වී ඇති මතුපිටට පහර දීමට හෝ සීරීමට ලෝහ මෙවලම් භාවිතා නොකරන්න.

3. යන්ත්රය දිගු කලක් ධාවනය කිරීම නැවැත්වුවහොත් සම්ප්‍රේෂණය හෝ දරණ කොටස වැනි කොටස්වල ලිහිසි කිරීම සඳහා ග්‍රීස් එක් කරන්න; යන්ත්රය ජල ආරක්ෂිත ආරක්ෂාවක් සමඟ ප්රතිකාර කරන්න

4 Never put any objects on the machine lest it damage the machine.

5. සංරචක තුළ ඇති දූවිලි වරින් වර පිරිසිදු කර සියලු ඉස්කුරුප්පු පරීක්ෂා කර ලිහිල් කරන ලද ඉස්කුරුප්පු ඇණ සවි කරන්න.

6. නිශ්චිත වේලාවක වයර් කිරීම සඳහා පර්යන්තවල ඇති ඉස්කුරුප්පු පරීක්ෂා කර ඉස්කුරුප්පු ඇණ සවි කර ඇති බවට වග බලා ගන්න;

7. විදුලි පෙට්ටිවලින් දිගු කරන ලද රැහැන් මාර්ගයේ කිසියම් ලිහිල් ස්ථානයක් තිබේදැයි පරීක්ෂා කරන්න; කොටස ඉතා ලිහිල් නම්, විදුලි කාන්දුවීමට හේතු විය හැකි පරිවාරක ස්ථරයේ ඇති උල්ෙල්ඛ හා හානිය වළක්වා ගැනීම සඳහා ඉස්කුරුප්පු ඇණ නැවත සවි කරන්න;

8. පහසුවෙන් පැළඳිය හැකි පැට් පරීක්ෂා කර හානියට පත් වේලාවට වෙනස් කරන්න;


 

ආශ්රිත නිෂ්පාදන